Physical and Mechanical Properties of Particleboard from Petung Bamboo-waste using Eco-friendly Chitosan-starch Adhesive

Riska Dwiyanna, Ragil Widyorini, Greitta Kusuma Dewi

Abstract


The effect of starch addition in chitosan adhesive on the physical and mechanical properties of petung bamboo particleboard from bamboo-sawing waste was investigated in this work. The utilization of bamboo-sawing waste particles as a raw material for particle board manufacturing has been gaining attention due to its waste reduction potential and economic advantages. The results of this study indicated that starch has been proven to enhance the physical and mechanical properties of petung bamboo particleboard. Adding only 4% wt. of chitosan/starch adhesive with a chitosan/starch ratio of 7/3 (w/w) has resulted in an improvement in the physical properties of the particleboard, such as moisture content, thickness swelling, and water absorption. It has also enhanced the mechanical properties of the particle board, including modulus of elasticity (MOE), modulus of rupture (MOR), and internal bonding (IB), in comparison to chitosan adhesive without starch addition. Overall, these findings provide insights for further developing chitosan/starch adhesive, especially to produce natural-based adhesives with good bonding quality.


Keywords


bamboo; chitosan; particleboard; starch; wood adhesive; physical and mechanical properties

Full Text:

PDF

References


Boussetta, A., Benhamou, A.A., Charii, H., Ablouh, E.H., Mennani, M., Kasbaji, M., Boussetta, N., Grimi, N., Moubarik, A., 2023. Formulation and Characterization of Chitin-Starch Bio-Based Wood Adhesive for the Manufacturing of Formaldehyde-Free Composite Particleboards. Waste Biomass Valorization. https://doi.org/10.1007/s12649-023-02091-x

El Knidri, H., Belaabed, R., Addaou, A., Laajeb, A., Lahsini, A., 2018. Extraction, chemical modification and characterization of chitin and chitosan. Int J Biol Macromol.

https://doi.org/10.1016/j.ijbiomac.2018.08.139

Ji, X., Guo, M., 2018. Preparation and properties of a chitosan-lignin wood adhesive. Int J Adhes Adhes 82, 8–13. https://doi.org/10.1016/j.ijadhadh.2017.12.005

Li, K., Zuo, Y., Zheng, L., Wang, H., Wu, Y., 2023. Preparation of high-strength, water-resistant starch adhesive and its bonding mechanism to cotton stalk. Ind Crops Prod 194. https://doi.org/10.1016/j.indcrop.2023.116344

Lindangan, L., Putranto, B., Suhasman, A., Pemanfaatan, L., Pengolahan, D., Hutan, H., Kehutanan, F., 2019. Optimum Condition of the Hot-Pressing Process for Producing Particleboards using Chitosan Adhesive. Jurnal Perennial 15, 67–73.

Mayilswamy, N., Kandasubramanian, B., 2022. Green composites prepared from soy protein, polylactic acid (PLA), starch, cellulose, chitin: a review. Emergent Mater. https://doi.org/10.1007/s42247-022-00354-2

Sulaiman, N.S., Hashim, R., Hazim, M., Amini, M., Sulaiman, O., Hiziroglu, S., 2013. Particleboard adhesive, BioResources.

Sulaiman, N.S., Hashim, R., Sulaiman, O., Nasir, M., Amini, M.H.M., Hiziroglu, S., 2018. Partial replacement of urea-formaldehyde with modified oil palm starch based adhesive to fabricate particleboard. Int J Adhes Adhes 84, 1–8. https://doi.org/10.1016/j.ijadhadh.2018.02.002

Umemura, K., Kawai, S., 2008. Preparation and characterization of maillard reacted chitosan films with hemicellulose model compounds. J Appl Polym Sci 108, 2481–2487. https://doi.org/10.1002/app.27842

Umemura, K., Kawai, S., 2007. Modification of chitosan by the Maillard reaction using cellulose model compounds. Carbohydr Polym 68, 242–248. https://doi.org/10.1016/j.carbpol.2006.12.014

Widyorini, R., 2020. Evaluation of Physical and Mechanical Properties of Particleboard Made from Petung Bamboo Using Sucrose-based Adhesive. Bioresources 15, 5072–5086.

Widyorini, R., Umemura, K., Kusumaningtyas, A.R., Prayitno, A., 2017. Effect of Starch Addition on Properties of Citric Acid-bonded Particleboard Made from Bamboo, BioResources.

Xi, X., Pizzi, A., Lei, H., Zhang, B., Chen, X., Du, G., 2022. Environmentally friendly chitosan adhesives for plywood bonding. Int J Adhes Adhes 112. https://doi.org/10.1016/j.ijadhadh.2021.103027

Yusof, M., Lamaming, J., Hashim, R., Yhaya, M.F., Sulaiman, O., Selamat, M.E., 2020. Flame retardancy of particleboards made from oil palm trunk-poly(vinyl) alcohol with citric acid and calcium carbonate as additives. Constr Build Mater 263. https://doi.org/10.1016/j.conbuildmat.2020.120906

Zargar, V., Asghari, M., Dashti, A., 2015. A Review on Chitin and Chitosan Polymers: Structure, Chemistry, Solubility, Derivatives, and Applications. ChemBioEng Reviews.

https://doi.org/10.1002/cben.201400025




DOI: https://doi.org/10.51850/wrj.2023.14.1.34-40

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Wood Research Journal

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Indexed by:

                       

 

Copyright ©Wood Research Journal  

    ISSN: 2087-3840,       EISSN: 2774-9320

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.